Chúng tôi sử dụng cookie để luôn cải thiện và giúp bạn có trải nghiệm tốt hơn khi sử dụng TechJobs.
6.189 open

VinRobotics·Hà Nội·Thấy

VinDynamics·Hà Nội·Thấy

VinFast·Hà Nội·Đăng

Chưa ghi lương
Senior
5-7 YoE
Hanoi
Full Time
Senior System Electrical Engineer designing electrical architecture for humanoid robot mass production targeting EU/US markets.
Tóm tắt bằng AI từ JD gốc, đọc JD gốc trước khi ứng tuyển.
We are hiring a Senior System Electrical Engineer for a humanoid robot preparing for mass production for the EU and US markets. You will own the electrical architecture of the whole robot: power, communication networks, the safety chain, the wire harness, and you will take the robot through safety, EMC and cybersecurity standards.
Level: Senior
Location: Hanoi, Vietnam
Type: Full-time
The goal of the System EE area: a robot that is compact, light and uses fewer wires, safe per ISO 13849 (target PL d), and certified for international markets.
• Build and maintain the robot’s overall electrical architecture (block diagram, zonal architecture) as the single source of truth for PCBA, firmware and mechanical teams.
• Write system requirements and allocate them to each subsystem (compute, PDS, BMS, drives, sensors, audio front end, Connectivity Box) per ASPICE SYS.1–SYS.3, with traceability in Jira/Confluence.
• Author and control the ICDs for every interface: power, EtherCAT, CAN-FD, Ethernet/TSN, PTP, safety signals (STO, FSoE), audio, cameras.
• Own the robot-level power, thermal, mass and data-bandwidth budgets.
• Design the 48V / 24V / 12V / 5V / 3.3V power distribution: per-branch eFuses, N+1 redundancy, hold-up, fall-critical power domain, regenerative energy handling.
• Design the wire harness and select robot-grade connectors (vibration-rated, secondary locking, flex-rated cables at joints) in Altium; coordinate cable routing with mechanical engineering in SolidWorks.
• Define the grounding, shielding and noise-control strategy for the whole robot.
• Contribute to the ISO 12100 risk assessment, the “uncontrolled fall” FTA and the Hazard Log.
• Design the robot-level safety chain: wired and wireless E-stop, STO, dual-channel motor power disconnect, brakes; target Category 3 / PL d per ISO 13849, ISO 13850 and IEC 61800-5-2.
• Consolidate subsystem FMEDAs, calculate PL for the full chain in SISTEMA, and own the robot-level Safety Concept.
• Ensure the design meets EN IEC 61000-6-2 / -6-4 / -6-7 and FCC Part 15B; organize pre-scans and resolve EMC issues.
• Build the robot-level cybersecurity architecture: network segmentation (zones / conduits per IEC 62443), secure boot and key management on all boards, debug-port lockdown, a controlled OTA path (EN 18031, UL 5500).
• Build the HIL integration bench, plan system-level DVP, and run fault injection on every single point of failure.
• Maintain the standards compliance matrix; work with test labs and notified bodies (pre-assessment, Technical File under EU Machinery Regulation 2023/1230, NFPA 79 / UL 1740).
• Provide technical support to the PCBA team and mentor junior engineers in the area.
• Bachelor’s degree or higher in Electrical Engineering, Electronics, Automation, Mechatronics or equivalent.
• 5 to 7 years of experience in electrical system design, in one of: automotive / EV, robotics, industrial machinery, UAV, medical devices.
• Hands-on ownership of the electrical architecture of at least one product taken to production: block diagram, ICDs, power budget, wire harness.
• Solid knowledge of DC power distribution (48V and below): overcurrent protection, eFuses, ORing, pre-charge, wire and connector selection, voltage drop, thermal.
• Working knowledge of industrial and automotive networks: EtherCAT, CAN / CAN-FD, Ethernet (TSN and PTP are a plus).
• Functional safety knowledge: hands-on work with ISO 13849, ISO 26262 or IEC 61508; understands Category, PL, DC, MTTFd and dual-channel architectures.
• Experience designing for EMC compliance and debugging EMC issues (grounding, shielding, filtering).
• Proficient in at least one electrical / harness design tool: Altium, E3.series, EPLAN, Capital or equivalent; able to read 3D mechanical drawings.
• Able to read and write technical documents in English (standards, datasheets, reports for test labs).
• Has taken products through EU or US certification: CE (Machinery, EMC, RED), IEC 60204-1, NFPA 79, UL; or worked directly with TÜV, UL, SGS.
• Experience with industrial robots, cobots, AMRs (ISO 10218, ISO 3691-4), or following ISO 25785-1 for actively stabilized robots.
• Has designed systems with FSoE, STO, SS1, SLS; uses SISTEMA; holds a FuSa certificate (e.g., TÜV Functional Safety Engineer).
• Experience with automotive zonal architectures, single-pair Ethernet (10BASE-T1S), A2B-type audio buses.
• Understanding of lithium batteries and BMS (IEC 62133, UN 38.3), or power electronics / motor drives (GaN, SiC).
• Embedded cybersecurity knowledge: IEC 62443, EN 18031, secure boot, TPM/HSM, OTA.
• Experience working under ASPICE or a V-model process; uses Jira / Confluence.
• Python skills to automate calculations (power budget, voltage drop, BOM) or HIL tests.
• Systems thinking: sees the whole robot, not just one board; makes trade-offs between performance, mass, cost and safety.
• Cross-functional collaboration: works daily with PCBA, firmware, control software, mechanical, DVP test, manufacturing and suppliers.
• Documentation discipline: writes clear requirements, ICDs and reports with traceability; keeps versions and controls changes.
• Safety first: willing to stop a change that has not been shown to be safe, even under schedule pressure.
• Root-cause problem solving: uses log data and measurements to find causes when the robot fails, not guesswork.
• Mentoring: reviews designs and coaches junior engineers.
• Competitive compensation based on capability.
• Own the electrical architecture of a humanoid robot from design through mass production and international certification.
• Work with new technology.
• Training and support toward certifications in functional safety, EMC and cybersecurity.
• Two career paths: technical expert (Principal / System Architect) or management (System EE lead).
• Encouraged to file patents and join the team’s innovation projects.
Đang tải…
Nguồn: careers VinRobotics