Chúng tôi sử dụng cookie để luôn cải thiện và giúp bạn có trải nghiệm tốt hơn khi sử dụng TechJobs.
6.189 open

VinRobotics·Hà Nội·Thấy

Chưa ghi lương
Senior
5-7 YoE
Hanoi
Full Time
Senior System Electrical Engineer designing electrical architecture for humanoid robot mass production targeting EU/US markets.
Tóm tắt bằng AI từ JD gốc, đọc JD gốc trước khi ứng tuyển.
We are hiring a Senior System Electrical Engineer for a humanoid robot preparing for mass production for the EU and US markets. You will own the electrical architecture of the whole robot: power, communication networks, the safety chain, the wire harness, and you will take the robot through safety, EMC and cybersecurity standards.
Level: Senior
Location: Hanoi, Vietnam
Type: Full-time
The goal of the System EE area: a robot that is compact, light and uses fewer wires, safe per ISO 13849 (target PL d), and certified for international markets.
• Build and maintain the robot’s overall electrical architecture (block diagram, zonal architecture) as the single source of truth for PCBA, firmware and mechanical teams.
• Write system requirements and allocate them to each subsystem (compute, PDS, BMS, drives, sensors, audio front end, Connectivity Box) per ASPICE SYS.1–SYS.3, with traceability in Jira/Confluence.
• Author and control the ICDs for every interface: power, EtherCAT, CAN-FD, Ethernet/TSN, PTP, safety signals (STO, FSoE), audio, cameras.
• Own the robot-level power, thermal, mass and data-bandwidth budgets.
• Design the 48V / 24V / 12V / 5V / 3.3V power distribution: per-branch eFuses, N+1 redundancy, hold-up, fall-critical power domain, regenerative energy handling.
• Design the wire harness and select robot-grade connectors (vibration-rated, secondary locking, flex-rated cables at joints) in Altium; coordinate cable routing with mechanical engineering in SolidWorks.
• Define the grounding, shielding and noise-control strategy for the whole robot.
• Contribute to the ISO 12100 risk assessment, the “uncontrolled fall” FTA and the Hazard Log.
• Design the robot-level safety chain: wired and wireless E-stop, STO, dual-channel motor power disconnect, brakes; target Category 3 / PL d per ISO 13849, ISO 13850 and IEC 61800-5-2.
• Consolidate subsystem FMEDAs, calculate PL for the full chain in SISTEMA, and own the robot-level Safety Concept.
• Ensure the design meets EN IEC 61000-6-2 / -6-4 / -6-7 and FCC Part 15B; organize pre-scans and resolve EMC issues.
• Build the robot-level cybersecurity architecture: network segmentation (zones / conduits per IEC 62443), secure boot and key management on all boards, debug-port lockdown, a controlled OTA path (EN 18031, UL 5500).
• Build the HIL integration bench, plan system-level DVP, and run fault injection on every single point of failure.
• Maintain the standards compliance matrix; work with test labs and notified bodies (pre-assessment, Technical File under EU Machinery Regulation 2023/1230, NFPA 79 / UL 1740).
• Provide technical support to the PCBA team and mentor junior engineers in the area.
• Bachelor’s degree or higher in Electrical Engineering, Electronics, Automation, Mechatronics or equivalent.
• 5 to 7 years of experience in electrical system design, in one of: automotive / EV, robotics, industrial machinery, UAV, medical devices.
• Hands-on ownership of the electrical architecture of at least one product taken to production: block diagram, ICDs, power budget, wire harness.
• Solid knowledge of DC power distribution (48V and below): overcurrent protection, eFuses, ORing, pre-charge, wire and connector selection, voltage drop, thermal.
• Working knowledge of industrial and automotive networks: EtherCAT, CAN / CAN-FD, Ethernet (TSN and PTP are a plus).
• Functional safety knowledge: hands-on work with ISO 13849, ISO 26262 or IEC 61508; understands Category, PL, DC, MTTFd and dual-channel architectures.
• Experience designing for EMC compliance and debugging EMC issues (grounding, shielding, filtering).
• Proficient in at least one electrical / harness design tool: Altium, E3.series, EPLAN, Capital or equivalent; able to read 3D mechanical drawings.
• Able to read and write technical documents in English (standards, datasheets, reports for test labs).
• Has taken products through EU or US certification: CE (Machinery, EMC, RED), IEC 60204-1, NFPA 79, UL; or worked directly with TÜV, UL, SGS.
• Experience with industrial robots, cobots, AMRs (ISO 10218, ISO 3691-4), or following ISO 25785-1 for actively stabilized robots.
• Has designed systems with FSoE, STO, SS1, SLS; uses SISTEMA; holds a FuSa certificate (e.g., TÜV Functional Safety Engineer).
• Experience with automotive zonal architectures, single-pair Ethernet (10BASE-T1S), A2B-type audio buses.
• Understanding of lithium batteries and BMS (IEC 62133, UN 38.3), or power electronics / motor drives (GaN, SiC).
• Embedded cybersecurity knowledge: IEC 62443, EN 18031, secure boot, TPM/HSM, OTA.
• Experience working under ASPICE or a V-model process; uses Jira / Confluence.
• Python skills to automate calculations (power budget, voltage drop, BOM) or HIL tests.
• Systems thinking: sees the whole robot, not just one board; makes trade-offs between performance, mass, cost and safety.
• Cross-functional collaboration: works daily with PCBA, firmware, control software, mechanical, DVP test, manufacturing and suppliers.
• Documentation discipline: writes clear requirements, ICDs and reports with traceability; keeps versions and controls changes.
• Safety first: willing to stop a change that has not been shown to be safe, even under schedule pressure.
• Root-cause problem solving: uses log data and measurements to find causes when the robot fails, not guesswork.
• Mentoring: reviews designs and coaches junior engineers.
• Competitive compensation based on capability.
• Own the electrical architecture of a humanoid robot from design through mass production and international certification.
• Work with new technology.
• Training and support toward certifications in functional safety, EMC and cybersecurity.
• Two career paths: technical expert (Principal / System Architect) or management (System EE lead).
• Encouraged to file patents and join the team’s innovation projects.
Đang tải…
Nguồn: careers VinRobotics